Guest post: Oscar and Javier of Eltalleraudiovisual.com explore Switcher Studio for iPad with external cameras

I met the guys Javier and Oscar, behind Eltalleraudiovisual.com at Mojocon, they are two absolute gents. They also blog about mojo at http://yoscontenidos.com

Screen Shot 2015-11-16 at 12.07.22

They shot this really great mojo teaser about Mojocon for which I am exceptionally grateful.

Based in Alicante, Spain they provide comprehensive mojo courses and production facilities. Their blog is a great source of information about Mojo, in Spanish and English. Earlier this year on the Mojocon Facebook group they posted a thread about using Switch Studio (aka RecoLive) with external devices, i.e. non-iOS devices. I asked would Oscar be interested in sharing his experiences via a guest post and he kindy agreed. A colleague of mine, Leola Lillis previously posted about Switcher Studio on this blog.

***********************************

How to make a mobile multi-camera production with iPads, iPhones, or any other video source.

How to add a video source to Recolive Multicam and Switcher Studio

Recolive Multicam is an application developed to record multi-camera productions using a WiFi network connection that allows you to sync up to 4 different video sources running on iOS and/or Mac devices. The norm is to use the built-in camera of your iPad as one of the cameras, and as the live mixer of all other video signals.

01 portada-void

Switcher Studio is a mobile video app that performs the same functions as Recolive Multicam, but additionally allows you to stream LIVE video while recording, as wells as, to view it using an HDMI adaptor or via Airplay.

Check-out the following post to learn all about how I’ve managed to go further into the use of these apps by using an external video source that does not run on an iOS device.

________

Recolive Multicam and Switcher Studio: multi-camera video apps. 

I have recorded many videos using an iPad4 and an iPhone 5S (https://www.youtube.com/user/cocinandoenvideo) with Recolive Multicam (http://eltalleraudiovisual.com/recolive-multicam-realizacion-multicamara-iphone-ipad/). This is without a doubt one of my favorite apps, because it allows me to have my own TV studio in the iPad. I can choose among the different video sources right there live; enhance the production with signs, tittles, headlines, overprinting or logos; use transitions; mix images Picture in Picture; or divide the screen; I may even select the device that will be the main provider of the audio signal.

Switcher Studio was developed after Recolive Multicam and widens its many functions allowing multi-camera streaming productions

From now on, thanks to apps like this one – with a very simple learning curve-, anyone, either a person or an institution will be able to record cultural or sports events, interviews, round tables, or simply create video courses. Let me give you an example to illustrate it, with a challenge that I have taken on recently.

02 Pantalla-Recolive-Multicam
02 Pantalla-Recolive-Multicam

Recording a Surgical video using Recolive Multicam

A few days ago, while teaching one of our recording with mobile devices in-house seminars –with our brand YOS Contenidos (http://www.yoscontenidos.com) -, I was asked about the possibility of a multi-camera production in an operating room mixing 3 different video signals as follows:

– One from an iPad recording a general shot of the room, showing the surgeons around the surgical table (the iPad would also act as the main mixer of all other video sources);

– A second one from an iPhone focusing on the patient area where the surgeon keeps his trocars (surgical instruments used to perform procedures without practicing open surgery)

– Finally, the third one would be the image provided by a trocar, or tube equipped with optical elements that sends images from the inside of the human body to a screen, guiding the surgeon during the procedure.

As you have probably guessed by now, the problem is that the laparocopy video is not an iOS or Mac device, therefore, incompatible for the Recolive Multicam recording (the use of which would make them save a lot of money).

The challenge: Full screen live preview using a video capture card

As I’ve mentioned before, Recolive Multicam can only mix video sources from iOS devices using the corresponding app, or running it from Mac computers that have the appropriate free software, Recolive Capture (http://recolive.com/en/blog/40-recolive-capture), to share the screen or to shoot with the laptop camera. That seemed to be the solution.

03 Recolive-Capture
03 Recolive-Capture

I thought that maybe connecting a MacBook to a capture card device showing the trocar signal would be enough…

I needed video capture software that would preview full screen, but, none of the software that I tried, including BlackMagic Media Express, did the trick. I asked my streaming expert friends about it, but they could only advise about purchasing hardware, not software; therefore, the costs were skyrocketing.

04 Blackmagic-Ultrastudio-cables
04 Blackmagic-Ultrastudio-cables

After several try-outs, and a lot of Internet searching, I found a video in a French site that explained how to use a MacBook screen to play with a Playstation using Blackmagic capture cards: full screen!!!  (https://youtu.be/M0usSD-4Q5Y)

We could make full screen live preview from the capture card, FullHD (depending on the latptop and the source), by using the free software capabilities of Pixel Conduit.

Solution: “Full screen live preview video from capture card”

Let me fully describe all the steps taken in the test I run, and that I hope to be using very soon in an operating room.

Equipment used:

  • 2 iPhones 5s with Recolive Multicam app
  • 1 iPad 4 with Recolive Multicam app
  • 1 MacBook with Recolive Capture software
  • A video capture BlackMagic UltraStudio Express card
  • 1 Canon HDV AX-H1 camera (video source used as the “trocar” for this test)
  • Free software from Pixel Conduit (http://pixelconduit.com )


05 Pixel-Conduit05 Pixel-Conduit

Process:

1. Preparing images, lowers, and logos; saving them into the iPad that will be used as the mixer.

2. Setting up the video input from the Mac through Blackmagic Media Express and the video capture Blackmagic card. In this case, PAL 1920×1080. I will turn off the software once I see the signal.

3. Setting up all video sources, 2 iPhones and the Mac screen, through Recolive Multicam.

4. Setting up Pixel Conduit to recognize the video source coming from the Blackmagic card and previewing it full screen. See video, isn’t it simple?

5. Selecting the transitions that I will be using, as well as the durations in the iPad; select the multiviews; fix the White balance, the exposure and the focus of the iPhone cameras

Silence in the set: 3, 2, 1… let’s shoot!

And this is the test result: https://youtu.be/7zYopY5PmkQ (In Spanish)

Conclusions

The option to use an external video source with Blackmagic capture card allows me to increase the options to shoot with several iPhone and iPad devices into any other video source.

Furthermore, if you would like to shoot with several microphones and you have a sound table, you may use it as a mixing console for the audio signal, connecting the output of the table to the iPad mixer through a digital interface such as iRigPro or Shure MVi, or an analogic interface such as iRigPre or a Tascam iXZ.

There is absolutely not a more affordable way to do up to 4 sources multi-camera productions.

06 Maria-iPad-recolive-live-recipes-CookPad-full-size
06 Maria-iPad-recolive-live-recipes-CookPad-full-size

Those were the pros, but I should mention the cons, there is a minor audio delay, around 0,1-0,2 seconds, from the external video source that does not come from Mac or iOS devices.  In this particular case, this will not be a problem for us, as the image from the laparoscopy does not have audio; although, if you would like to have someone speaking from that source, you will run into an unavoidable de-synchronization.

Finally, Recolive Capture only shares the screen of the MAC computer, but not the sound.

I hope that you will find this to be a useful post. I can’t wait to try this new option of multi-camera production in the operating room… Here is hoping that I will not faint while doing it….

I would like to thank Glen Mulcahy for his invitation to publish this translation in English of our article in his reference blog to all of us who record with our mobile devices.

Thank you also to Gabriele Mondada, CEO of Recolive Multicam to always respond so quickly and so gracefully to all my questions.

If you would like to read this post in Spanish, please visit our blog “el Taller Audiovisual” (http://eltalleraudiovisual.com/multicamara-con-ipad-iphone-y-cualquier-otra-fuente-de-video/ ), fully devoted to recording with mobile devices.

Xkuty Recording 02 Workshop PBC Coworking October 2015 Jovempa - Elda Major 10-30-15Xkuty Recording 03

Thank you!

About vjmentor
Innovation Lead, RTÉ | VJ & MoJo (Mobile Journalism) Trainer -Circom Regional | Photographer | HDSLR shooter| Views are strictly personal, not those of my employer.

One Response to Guest post: Oscar and Javier of Eltalleraudiovisual.com explore Switcher Studio for iPad with external cameras

  1. soy.oscaroncina says:

    Thanks for the opportunity Glen, we are very grateful. If someone need help about mojo in Spanish, we are here😉 Cheers, Óscar.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: